T.F. Hudgins Oil Mist Systems

T.F. Hudgins oil mist systems provide reliable lubrication for roller element bearings and metal surfaces in centrifugal pumps, electric motors, steam turbines and a broad range of rotating machinery. These systems meter a precise amount of oil to each bearing, resulting in highly effective lubrication, decreased oil consumption and lower overall maintenance costs.

Efficient by Design

T.F. Hudgins centralized oil mist systems atomize lubricating oil into small particles, which are conveyed by a low-pressure distribution system to multiple machinery bearings. Basic system components include an oil mist generator, header pipe system for mist transfer and reclassifiers that control the mist flow to each application point.

T.F. Hudgins oil mist generators are available in three configurations to serve a variety of lubrication points and operating requirements. Each generator features efficient design for reliability in operation and economy in maintenance and repair. Proprietary mist generator heads feature vortex technology with oversize mist ports.


KMC Generator

Designed for large systems where automatic monitoring is preferred

  • For use in Class 1, Group B, C & D, Division 2 areas
  • Fully enclosed pedestal mounted; single-door enclosure
  • 9-gallon SS reservoir with pressure-relief valve, oil level sight gauge and clean-out panel
  • Thermostatically controlled immersion oil heater and reservoir-mounted oil temperature gauge
  • High/low mist pressure transducer and mist pressure gauge
  • High and low oil level with auto fill
  • High and low temperature alarm
  • Air pressure regulator with gauge and auto air filter drain
  • High-visibility LED red and green operating status lights
  • Electrical power switch and terminal enclosure with common remote alarm
  • Available 40,100, 250, 500, and 1,000 bearing inch generator head
  • Heavy gauge aluminum enclosure

BMP Generator

Designed for intermediate systems where automatic monitoring is preferred

  • For use in Class 1, Group D, Division 2 areas
  • Monitoring capabilities
  • 5-gallon SS reservoir with pressure-relief valve, oil level sight gauge and clean-out panel
  • Thermostatically controlled immersion oil heater and reservoir-mounted oil temperature gauge
  • High/low mist pressure transducer and mist pressure gauge
  • High and low oil level with auto fill
  • High and low temperature alarm
  • Air pressure regulator with gauge and auto air filter drain
  • High-visibility LED red and green operating status lights
  • Electrical power switch and terminal enclosure with common remote alarm
  • Available 40, 100, 250, 500, or 1,000 bearing inch generator head

BM Generator

Designed for small systems where manual control and monitoring are preferred

  • For use in Class 1, Group D, Division 2 areas
  • 3-gallon SS reservoir with pressure-relief valve and oil level sight gauge
  • Thermostatically controlled immersion oil heater and reservoir-mounted oil temperature gauge
  • Low oil level switch
  • Air pressure regulator with gauge and auto air filter drain
  • Available 40, 100, 250 or 500 bearing inch generator head

For more information, contact your local T.F. Hudgins representative or call 800-LUBE -TFH.

T.F. Hudgins oil mist systems provide reliable lubrication for centrifugal pumps, electric motors, steam turbines and other rotating machinery

Contact Us About T.F. Hudgins Oil Mist Systems

Provide Your Information
Name:
Phone #:
Email:
How can we meet your needs:
With which services can we help:
(Select all that apply)