Divider Valves

MSP Assemblies

Designed for low-pressure grease or oil applications, the MSP divider valve assembly provides precise monitoring and positive feedback.

MSP assemblies are simple to install and operate. The modular design provides complete flexibility.

Components. Each assembly includes a minimum of three working valve sections and a base plate comprised of one inlet, one end and any number of intermediates, depending on the number of valve sections required (minimum of 3 and maximum of 8). This design provides from 1 to 16 working outlets with the use of crossport and singling plates. Each outlet is equipped with internal check valves. External check valves are available to keep the lines full and prevent lubricant from re-entering the assembly.

Options. SAE, NPT and BSP thread options on inlet and outlet connections allow installation on any equipment–domestic or international.

MSP assemblies are available in carbon steel with corrosion-resistant plating, as well as in stainless steel.

MSP assemblies can be provided with a zero-leak inlet shut-off. Either electrically or pneumatically actuated, this is a three-function valve:

  1. allows lubricant to enter the divider valve,
  2. bypasses lubricant to another divider valve, or
  3. diverts lubricant back to the tank.

A zero-leak inlet shut-off replaces the standard inlet or can be mounted in-line with a remote manifold kit.

Features and Benefits

  • Suitable for grease or oil applications
  • Up to 16 lubrication points
  • Inlets and outlets available in SAE, NPT and BSP threads
  • Up to 3,500 psi
  • Built-in check valves help keep lines full
  • Replaces DropsA®, Lincoln®, SB®and CC Technology block valve assemblies
  • Available in stainless steel
  • Bypass section available to enable or eliminate lube points in the future

MHP Assemblies

Similar to MSP divider valves, MHP divider valves are designed for higher pressure applications up to 7,500 psi.

MHP divider valves precisely proportion a volume of oil to satisfy the different requirements of every point in a lube system. They operate in sequential fashion to ensure that no point is missed. Series-Progressive design provides ready monitoring capabilities.

Components. Each assembly includes a minimum of three working valve sections and a base plate comprised of one inlet, one end and any number of intermediates, depending on the number of valve sections required (minimum of 3 and maximum of 8). This design provides from 1 to 16 working outlets with the use of crossport and singling plates. Each outlet is equipped with internal check valves. External check valves are available to keep the lines full and prevent lubricant from re-entering the assembly.

Soft-seal O-ring construction and indicator ports minimize leakage and reduce maintenance.

Options. A modular, stackable sub-plate design provides maximum application flexibility and simplifies build-up, installation and maintenance. Accessory components are available for visual diagnostics and electrical monitoring.

Features and Benefits

  • Suitable for petroleum or synthetic-based oil applications
  • Up to 16 lubrication points 
  • Inlets and outlets available in SAE, NPT and BSP threads
  • Up to 7,500 psi
  • Built-in check valves help keep lines full
  • Replaces DropsA®, Lincoln®, SB®and CC Technology block valve assemblies
  • Available in stainless steel
  • Bypass section available to enable or eliminate lube points in the future

MXP, MJ, MX, MGO and MD Assemblies

Series MJ
Series MJ

T. F. Hudgins offers additional divider valve assembly designs for effective lubrication in a wide variety of applications. Each offers modular, stackable subplate/valve design to simplify system planning, installation and maintenance.

Features and Benefits

  • Suitable for grease or oil applications
  • Up to 16 lubrication points
  • Inlets and outlets available in SAE, NPT and BSP threads
  • Up to 3,500 psi
  • Built-in check valves help keep lines full
  • Replaces DropsA®, Lincoln®, SB®and CC Technology block valve assemblies 
  • Available in stainless steel
  • Bypass section available to enable or eliminate lube points in the future

Contact Us About Divider Valves

Provide Your Information
Name:
Phone #:
Email:
How can we meet your needs:
With which services can we help:
(Select all that apply)